| Remove the headlight bracket and front bumper by
removing three bolts on the top and one underneath, each side. |
 |
| The headlight bracket and front bumper
came off easily. |
 |
| The Haynes manual didn't mention this but the
hand brake cables have to be removed. There is a clip bolted on to the brake back plate.
The bolt had a length of rod welded to it. Somebody had found it difficult to put this
back and found a cunning way of doing it. |
 |
| The engine lifted out easily. |
 |
| Now to take the front and rear suspension arms
of the chassis. The bolts underneath look corroded. |
 |
