| Removed the 4 bolts holding the front cross tube
to the chassis and removed it. Almost got my finger squashed under steering arm. |
 |
| Removed the 4 bolts from the back tube and
removed it. There are aluminum spacers between the bracket and the chassis. The different
material causes corrosion. I had to angle grind one of the bolts as it would not turn. |
 |
| To remove the hand brake lever there are two
hollow rivets that have to be removed, one at each end. When these are out the bracket and
tube slide along allowing the assemble to move out of the slots. |
 |
| Took chassis outside and started to clean it up. |
 |
| Removed the brake pipes. they were very
corroded. |
 |
