| I derusted, filled, primered and painted the vent shutter.... |  |
| Then refited the rubber hinge/seal. |  |
|
This is bolted to the body with an aluminium trim strip. Inside the trim strip is a steel strip with 12 holes that have captive T-headed screws. These screws are 3mm dia. The nuts are 5.5 mm a/f |
 |
| Some were rusty or broken so I made some more by grinding down the heads of standard screws until they would slide inside the trim. |  |
| Although the vent shutter was dead flat there was a gap at one end when fitted. The replacement panel must be slightly out of true! |  |
| The fly grill mesh has to be fitted at the same time. |  |