| Following on from the recently added
Ralph McQuarrie concept Stormtrooper section,
this area deals with what Darth Vader (or at the time General Vader)
would have looked like if the sculptors had followed one of the other
concept designs put forward by visionary artist Ralph McQuarrie |
|
|
| If we go way back to January 1976, Brian Muir (see
interview here) took a lump of clay and sculpted what we now all know as
"Darth Vader" basing his work on the design Lucas' had selected
following numerous iterations from designer Ralph McQuarrie. In transitioning
any work from the 2D to 3D world, there will always be a certain amount of artist
interpretation, and all this is reflected in the sculptors final work. However, there
were a number of other slightly varied designs by McQuarrie, and more
recently a number of prop makers have gone back to some of the original
McQuarrie designs and produced their own interpretations of the initial
Vader designs.
As a side issue, one of the earlier Vader drawings was used to create the
CZ-3 Jawa Sandcrawler Droid, and you can read more about this in the
Brian Muir interview page.
|
|
JRX Concept Vader |
|
 |
| So first up is JRX's excellent interpretation
of one of McQuarrie earlier Vader designs, which has a tighter nose area,
more angular face and spear-like widows peak. |
|
 |
| This helmet is the design seen in the
pre-production painting where an Oxygen-mask wearing Luke is fighting Darth
Vader onboard the Tantive IV in an earlier draft of the story. |
|
 |
| Below a shot from the rear showing what must be
JRX''s interpretation of the rear dome - since McQuarries drawings were I
believe only front or side-on. I really like the horoz twin stripe. |
|
|
|
|
| Below a shot of the helmet altered to show what
it would look like with the same 2-tone paint finish of used on screen-used
helmets to help light it more effectively. |
|
 |
| And finally below a comparison shot against a
screen-size Don Post Deluxe helmet, showing what big helmet it is. This new
helmet really does look superb and is another great example of how the
fan-base is really able to really expand the Star Wars universe. |
|
 |
| Jerry sent me these shots of his
completed JRX helmet recently (March 08) |
|
|
| I think new new pro images really
show off this helmet well - it looks superb. |
 |
 |
|
|
| I really like the gloss finish- it
suits it well. |
|
|
|
KropSerkel's concept General Vader
|
| Next up is Kropserkel's interpretation of the
character, which at this early part of his development was referred to in
the script as General Vader. |
|
|
| Its an extremely aggressive looking
design, above with the same slate-grey matt finish and below with a more
shiny vac-pulled dome. |
|
|
| This is another superb interpretation of
McQuarrie's work. Though only recently finished, Kropserkel actually started
the work in 1997 before putting it to one side. |
|
|
| Side on the circle shown in McQuarrie's drawing
is quite pronounced but acts to break up the dome, giving it good
definition for lighting |
|
|
| Yep - certainly a mean one, and again extremely
impressive work. |
|
Canadian Concept Vader
|
| Now this one I absolutely love. Its
a one off created by Mark, a Canadian prop maker which I think is just
absolutely incredible with its battle-damaged appearance. Now this
Vader looks like he's been through the Clone Wars! |
|
|
| This Vader was shown off in a Canadian comic
book store for some time and is based on the McQuarrie concept which
illustrated the first Ballantine Books Star Wars novel published early 1977.
Though looking more like the final screen-used Vader design, it features
some really cool face detailing - and as a concept is absolutely marvellous. |
|
 |
 |
| Mark's a great sculptor and has
really succeeded in capturing the dead-eyed evil stare of the McQuarrie
look. Mark started building the helmet way back in 2003, just because
he loved the look of the design. |
|
|
| Mark's goal was to create the kind
of Vader he really wanted to see in Episode III ... a kind of hopeful
prediction...." I thought it would be amazing to see that mask and armor
as if it had endured years of battle in the Clone Wars. Maybe it got so
weathered it would be replaced by the time A New Hope happened." |
|
|
| The mask needed a lot of time to
work on, so he sculpted it in an oil based clay, fitting the helmet onto it
to make sure the proportions were okay. |
|
|
| Then he moulded the mask, and cast
it in poly resin, endless sanding and hole filling, finally primer and auto
body paint. The helmet, mask and armor parts were all painted at the same
time. |
|
 |
| Above, a head and shoulders shot of
the complete costume. |
|
|
| Does that look mean enough for you? |
|
|
| I think the thing I like about this
helmet (apart from it incredible aggressive appearance) is that it really
does look like its been hand cast out of iron! Oh, and if that isn't good
enough - its also a "reveal" with Mark's Anakin sculpt beneath the face
plate! How damn impressive is that? |
|
|
| Below a shot from a few years back
of the complete Vader next to his self-made Boba Fett - clearly Mark's a
VERY talented man. Many thanks to him for these shots of his extremely
unique Darth Vader. |
|
|
| |
|
Koo Koo's concept Darth Vader
|
| Last but by no means least is Koo Koo's concept
Vader. As many of you will know Koo Koo is a regular contributor to this
site and other examples of his work include the excellent McQuarrie Concept
Stormtrooper and soon to be added C-3PO |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
| |
