| Index |
| piccolo |
| eco 8 |
| nexus / bell 222 |
| shuttle |
| raptor no1 |
| raptor no2 |
| raptor no3 |
| raptor 60 |
| futura SE |
| conquest |
| skyflex |
| trainer |
Raptor 30
Pictured on the left, this was my first Raptor built November 1999. It started out with the TT36 engine but after a year messing, I tried the SC36 ringed motor
The SC has been the easyist motor to set up I've had,, just a couple of tweeks and off flying around.
The rappy uses stock blades, NHP tail pushrod kit driven by CSM180 gyro (was 360), Quick UK header tank and flybar stiffners.
 Futaba PPM rx in a Quick UK strong box, 3001 servos all round
and a Weston UK one peice pipe. |
|
|
|
|
| This
document maintained by darenh@ukonline.co.uk Material Copyright © 2001 Daren Hutchinson Last update 8 August 2001 |
|
