How to connect an Ericsson T28S/SC/WORLD to a PC...
A cable that will work with 'Direct Cable Connection' (DCC) in Windows'98 (and Laplink come to that...)
| Male DB-25 ==>> Male DB-25 |
| 1 Both Not used |
| 2 to 15 |
| 3 to 13 |
| 4 to 12 |
| 5 to 10 |
| 6 to 11 |
| 7 Both Not used |
| 8 Both Not used |
| 9 Both Not used |
| 10 to 5 |
| 11 to 6 |
| 12 to 4 |
| 13 to 3 |
| 14 Both Not used |
| 15 to 2 |
| 16 Both Not used |
| 17 to 19 |
| 18 to 18 |
| 19 to 17 |
| 20 Both Not used |
| 21 to 21 |
| 22 to 22 |
| 23 to 23 |
| 24 Both Not used |
| 25 to 25 |
Direct cable connection running under Windows'98 can be a bit of a strange thing to get running properly. There are a lot of bits to remember, such as making sure the port types on both machines are configured as the same type in their respective BIOS's. i.e. both ECP or both EPP, making sure that you always start the host connection first, have you got 'dial-up networking installed?, is UNC (universal naming convention) enabled?...etc etc etc
So, I have included a FAQ which covers just about anything you need to know about the subject. (dccfaq.doc 114Kb)
